We've spent years cleaning our reloading brass with stainless steel pins... then having to remove them and the stuck ones from cases. What a mess!!! We finally decided there had to be a way to remove most of the gunk and residue thorugh chemicals, so we experimented on it for a couple of years and this is the forumla that we came up with. It does a great job of cleaning your reloading brass without any other additives. Below are the easy steps to follow to have nice clean shiny brass. Please note, this solution only works in wet tumbers, do not add water or this solution to a dry media tumbler. The 16 oz solution will normally handle 96 loads of brass, calculating at 10 lbs a load.
Like all of our products, if you are not satisfied, return it to us (we pay postage) and we will refund 100% of your purchase price.
Add water to 10 pounds of brass, then add 1 teaspoon of Liquid Brass Cleaner.Agitate for 3 hours but no longer than 5.Drain and rinse brass until there is no soap residue.Drain thoroughly with media separator.
Add drained, wet brass to vibratory brass tumbler with clean corn cob media.Add 2 sprays of Turtle Wax Quick & Easy Wax & Dry Spray Wax.Run 2 hours, then separate brass from media.