Berry's .38/.357 Caliber 125 grain Flat Point Bullets
Berrys Superior Plated Bullets® are the finest bonded copper-jacketed bullets available today. Starting with a swaged lead core, they are electroplated with copper to their final weight, leaving no lead exposure.
They are then re-struck to precise specifications, ensuring a solid bond and providing consistency with every round. Indoor range safe and unbelievably accurate, Berrys Superior Plated Bullets® are the choice of shooters everywhere.
The past 50 years Berry's Manufacturing has been making exceptional quality bullets made to exacting standards. Discerning shooters enjoy the quality and performance of Berry's Manufacturing bullets in their practice, duty, and competition loads. Berry's Manufacturing bullets are made in house in St. George, Utah USA with family pride. Don't accept inferior products made of suspect quality, go with Berry's Manufacturing.
No exposed lead. Approved for use in all in door ranges.
Berry's recommend using hard cast load data or start with mid-range jacketed data. Keep in mind that since our plated bullet has the same pressure curve as a hard cast bullet, the published cast data will be very close to what you will get with our plated bullets. If you use Jacketed data with our plated bullets you can get from 5% - 8% increase in velocity using that data. Maximum recommended speed is 1500 FPS.
- Load data for our Superior Plated Bullets® can be found in any manual or on any powder manufacturer’s website.
- Cast or jacketed data with the same grain weight and profile will work with our bullets.
- You can use a taper or a roll crimp.
- Don’t over crimp the brass after seating. This causes bullet core separation, leading to increased copper fouling and accuracy issues.
- Don’t exceed the recommended maximum velocities listed. This creates bullet core separation and accuracy issues.
WARNING: Improperly reloaded ammunition can cause serious personal injury. Reloading should only be done by competent adults after proper instruction. Always wear safety glasses when reloading and consult current powder data guides. Since reloading operations are beyond our control, we disclaim all liability for any and all damages that may result and assume no liability or responsibility, expressed or implied.
LEAD WARNING: Discharging firearms in poorly ventilated areas, cleaning firearms, or handling ammunition may result in exposure to lead and other substances known to cause birth defects, reproductive harm, and other serious physical injury. Work in adequate ventilation at all times. Wash hands thoroughly after exposure. DO NOT reuse any containers.
LEGAL NOTICE: We are not familiar with the laws of all 50 states, each county, parish, city, town and village. Ensure you are legally allowed to order, receive and possess the items you are ordering. We are not liable for your ordering and obtaining any item on this website that may be prohibited by your laws.
We reserve the right to change without notice, price, availability, specifications, correct typographic, photographic or descriptive errors and may refuse orders or cancel at our discretion.